What should I carry out if clear plastic injection molding is unfinished?
0

What should I carry out if clear plastic injection molding is unfinished?

   This is a frequently encountered problem, but it is also relatively easy to solve. When it is really not solved by technological means, ...
What should I perform if plastic material injection molding is imperfect?
0

What should I perform if plastic material injection molding is imperfect?

This is a frequently encountered problem, but it is also relatively easy to solve. When it is really not solved by technological means, it c...
What is the principle of a power transmitter?
0

What is the principle of a power transmitter?

The power transmitter is a combination of multiple precision parts and requires careful use and maintenance. Before using a power transmitte...
How to set the low pressure and high pressure clamping positions?
0

How to set the low pressure and high pressure clamping positions?

The clamping process is generally divided into three or four stages, generally fast-slow-high pressure; fast clamping, according to the stru...
Analysis of several important injection molding process parameters
0

Analysis of several important injection molding process parameters

                                            The effect of plastic viscosity and conditions on viscosity The nature of the friction between m...
Next Generation of IGBT
0

Next Generation of IGBT

Efficient Chips and the Thermal Cycle Failure Free SLC-package-technology This concept is convincing because it is based on a standardized p...
Precautions for the appearance of plastic molds
0

Precautions for the appearance of plastic molds

Precautions for the appearance of plastic molds   1: The content of the nameplate should be printed with the mold number, mold weight (KG), ...
What kind of material can make a good mold?
0

What kind of material can make a good mold?

                                    Mold meets working conditions 1. Wear resistance When the blank is plastically deformed in the mold cavi...
Bridge Rectifier
0

Bridge Rectifier

The bridge rectifier is made up of four silicon rectifier chips for bridge connection and externally packaged with insulating plastic. The ...
Heat treatment process of plastic mold parts
0

Heat treatment process of plastic mold parts

Different types of steel are used as plastic molds , and their chemical composition and mechanical properties are different, so plastic cnc...
Have all the operating procedures of the injection molding workshop been achieved?
0

Have all the operating procedures of the injection molding workshop been achieved?

               Start-up preparation 1. Make preparations before production. 2. Turn on the heating switch to heat up. Check whether the heat...
IGBT Store
0

IGBT Store

# BSM300GB120DLC  Infineon BSM300GB120DLC New 2IGBT: 300A 1200V; IGBT Modules 1200V 300A DUAL , BSM300GB120DLC pictures, BSM300GB120DLC pric...
30 requirements for standardized injection mold making
0

30 requirements for standardized injection mold making

In order to improve the quality of plastic machining molds, minimize mold quality complaints, and meet customer needs when producing molds, ...